Flexible FETs using ultrathin Si microwires embedded in solution processed dielectric and metal layers

Khan, S and Yogeswaran, N and Taube, W and Lorenzelli, L and Dahiya, R (2015) Flexible FETs using ultrathin Si microwires embedded in solution processed dielectric and metal layers. Journal of Micromechanics and Microengineering, 25 (12). p. 125019. ISSN 0960-1317

[thumbnail of Khan_2015_J._Micromech._Microeng._25_125019.pdf] Text
Khan_2015_J._Micromech._Microeng._25_125019.pdf - Published Version

Download (1MB)

Abstract

This work presents a novel manufacturing route for obtaining high performance bendable field effect transistors (FET) by embedding silicon (Si) microwires (2.5 μm thick) in layers of solution-processed dielectric and metallic layers. The objective of this study is to explore heterogeneous integration of Si with polymers and to exploit the benefits of both microelectronics and printing technologies. Arrays of Si microwires are developed on silicon on insulator (SOI) wafers and transfer printed to polyimide (PI) substrate through a polydimethylsiloxane (PDMS) carrier stamp. Following the transfer printing of Si microwires, two different processing steps were developed to obtain top gate top contact and back gate top contact FETs. Electrical characterizations indicate devices having mobility as high as 117.5 cm2 V−1 s−1. The fabricated devices were also modeled using SILVACO Atlas. Simulation results show a trend in the electrical response similar to that of experimental results. In addition, a cyclic test was performed to demonstrate the reliability and mechanical robustness of the Si μ-wires on flexible substrates.

Item Type: Article
Subjects: East India Archive > Multidisciplinary
Depositing User: Unnamed user with email support@eastindiaarchive.com
Date Deposited: 09 Jun 2023 06:31
Last Modified: 07 Jun 2024 10:53
URI: http://ebooks.keeplibrary.com/id/eprint/1373

Actions (login required)

View Item
View Item